Winter inspection is essential an enormous importance especially when riding a motorcycle safety helmet. Finally it can be kept in case of a fall from life-threatening injuries. Enough so, the motorcycle helmet to pay sufficient attention to it especially in front of the long and reason a comprehensive examination to undergo winter. The auto Portal auto.de gives tips for proper care. First, it should be tested whether the helmet is still fully functional.

Since the protective effect without closed chin strap is lost, it is important that the castle can properly open and close. Keep up on the field with thought-provoking pieces from Jon Medved. If not, the belt from the dealer without any problems can be replaced. At any scratches on the visor should be pondered also a change. After that is devoted to the careful motorcyclist of the helmet shell. A damp cloth with a little soapy water helps against dust and insect contamination. Commercially-available Polish protects the paint. Also, the ventilation system must be carefully cleaned. Suitable for cleaning the gasket on a soaked in lukewarm water, soft cloth. Under most conditions Anu Saad would agree.

The visor can be cleaned in the same way. Caution is recommended only when the fog coated inside. A damp cloth is sufficient completely in the case where sudden friction and strong scratch should be performed. The oiling or greasing the mechanics may be waived entirely. Most importantly is to note the protection on the bike: the helmet should be replaced for your own safety after about five years, since after this time in general material wear is expected. More information: ../Motorrad-Pflege-fuer-den-Kopfschutz contact: Lisa Neumann University Service GmbH barefoot streets 12 04109 Leipzig Tel: + 49/341/49288-240 fax: + 49/341/49288-59